作紀念! :D
某台自製 ARM系統讀卡機 開機紀錄
s3c6400-uart.2: ttySAC3 at MMIO 0x7f005800 (irq = 24) is a S3C6400/10
s3c6400-uart.3: ttySAC3 at MMIO 0x7f005c00 (irq = 28) is a S3C6400/10
KS0108 : 0 GPIO_DI = 76 ,ret=0
KS0108 : 0 GPIO_E = 77 ,ret=0
KS0108 : 0 GPIO_CS1 = 88 ,ret=0
KS0108 : 0 GPIO_CS2 = 89 ,ret=0
KS0108 : 0 GPIO_D0 = 78 ,ret=0
KS0108 : 0 GPIO_D1 = 79 ,ret=0
KS0108 : 0 GPIO_D2 = 80 ,ret=0
KS0108 : 0 GPIO_D3 = 81 ,ret=0
KS0108 : 0 GPIO_D4 = 84 ,ret=0
KS0108 : 0 GPIO_D5 = 85 ,ret=0
KS0108 : 0 GPIO_D6 = 86 ,ret=0
KS0108 : 0 GPIO_D7 = 87 ,ret=0
fb0: cfag12864b frame buffer device
input: matrix-keypad as /devices/platform/matrix-keypad/input/input0
Console: switching to mono frame buffer device 16x4
loop: module loaded
S3C NAND Driver, (c) 2008 Samsung Electronics
S3C NAND Driver is using hardware ECC.
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
Creating 3 MTD partitions on "NAND 256MiB 3,3V 8-bit":
0x000000000000-0x000000080000 : "Bootloader"
0x000000080000-0x000000580000 : "Kernel"
0x000000580000-0x000010000000 : "File System"
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 129024 bytes
UBI: smallest flash I/O unit: 2048
UBI: sub-page size: 512
UBI: VID header offset: 512 (aligned 512)
UBI: data offset: 2048
UBI: max. sequence number: 3489
UBI: attached mtd2 to ubi0
UBI: MTD device name: "File System"
UBI: MTD device size: 250 MiB
UBI: number of good PEBs: 2000
UBI: number of bad PEBs: 4
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 2000
UBI: number of PEBs reserved for bad PEB handling: 20
UBI: max/mean erase counter: 3/2
UBI: image sequence number: 126855160
UBI: background thread "ubi_bgt0d" started, PID 399
dm9000 Ethernet Driver, V1.31
eth0: dm9000e at c8868000,c8c00004 IRQ 108 MAC: 08:90:90:90:90:90 (chip)
mousedev: PS/2 mouse device common for all mice
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
cpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 2: mmc_bus (24000000 Hz)
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-01 01:00:26 UTC (946688426)
Freeing init memory: 1376K
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "FriendlyARM-root"
UBIFS: file system size: 253532160 bytes (247590 KiB, 241 MiB, 1965 LEBs)
UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 0 bytes (0 KiB)
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
什麼鬼東西呀
回覆刪除ARM 機器的開機log...
回覆刪除開DebugPort才看的到! XD